Extensive range of superior quality valves, including monoblock control valves, check valves, inline valves, relief valves, log splitter valves, etc.
12V DC
Port: 1 1/4″
Current:18.6 A (±10%)
Motor Power: 0.26 kW
Protection Level: IP68
Air Flow: 0.32 kg/s
Noise Level: 79 dB(A)
Aluminium radiator
STU flow control valve is a one direction adjustable valve/ restrictor for in line installations. The passage on the opposite side is free.
It allows for a flow adjustment of oil passing through and lets you control the speed of hydraulic cylinder or a motor. The valves do not have an integrated hydraulic compensator and the set flow is affected by the pressure drops across the valve. The valves can be easily installed inline inside the hydraulic circuit through the two BPSS threads ports. Depending on the chosen size, the STU-BSPP valves can be installed inside circuits with max working pressure of 400 bar (5800 PSI).
The external body is made of steel, and it is protected from oxidation by zinc plating treatment. The inner components are made of steel, hardened and ground where necessary. The knobs are made of aluminum.
TYPE: VBCDF
Use and Operation
These valves are used to control actuator’s movements and block in one direction in order to enable the following functions:
Direct flange is ideal for Danfoss engine type OMP-OMR and provides a maximum safety, very low pressure drops and solid installation.
Materials and Features
Applications
Connect V1 and V2 to the pressure flow and flange C1 and C2 directly to the engine.
Nominal flow rate: 120 liter/min
Max. Pressure: P: 250 bar, T: 50 bar, A-B: 300 bar
Spool type: Standard open center spool (A spool), different spool options
Number of spools: From 1 to 4
Leakage: 8 cm3/min at 100 bar (From A,B to T)
Fluid temperature range: -10 oC … +80 oC
Working fluid: Mineral based hydraulic oil
Viscosity: 10-100 cSt (46 cSt mineral based hydraulic oil is recommended, may vary in different climates)
Filtration: 10 to NAS 1638
Nominal flow rate: 40 l/min
Max. Pressure: P: 315 bar, T: 50 bar, A-B: 300 bar
Spool type: Standard open center spool (A spool), different spool options
Number of spools: From 1 to 7
Leakage: 5 cm3/min at 100 bar (From A,B to T)
Fluid temperature range: -10 oC … +80 oC
Working fluid: Mineral based hydraulic oil
Viscosity: 10-100 cSt (46 cSt mineral based hydraulic oil is recommended, may vary in different climates)
Filtration: 10 to NAS 1638
Nominal flow rate: 80 liter/min
Max. Pressure: P: 315 bar, T: 50 bar, A-B: 300 bar
Spool type: Standard open center spool (A spool), different spool options
Number of spools: From 1 to 6
Leakage: 6 cm3/min at 100 bar (From A,B to T)
Fluid temperature range: -10 oC … +80 oC
Working fluid: Mineral based hydraulic oil
Viscosity: 10-100 cSt (46 cSt mineral based hydraulic oil is recommended, may vary in different climates)
Filtration: 10 to NAS 1638
On/Off directional control mono-block valve- P81 log splitter valve is directing the working fluid between pumps and consumers (hydraulic cylinders, motors, etc.) and the tank.
Spring centered in one direction with pressure released detent in the other direction. It automatically kicks back to neutral when the cylinder completes the stroke. Also includes a built-in adjustable inlet relief valve.
Hydraulically balanced, hard chrome plated spool
Lever system in which the handle can be installed in up or down position
Detent release pressure adjustable from 70 to 140 bar
In neutral position both work ports are blocked and the pump unloads to the tank.
VMP
Use and Operation
The relief valve provides overload protection in a fast and accurate way: when it reaches pressure setting, the valve open allowing pressure relief in order not to exceed this setting.
Materials and Features
Applications
Connect circuit port with pressure to P and tank port to T. Port P is reversible..
TYPE: VSQAPP
Use and Operation
Sequence valve is used to feed 2 cylinders in sequence: it provides flow to the secondary circuit when a primary circuit function has been completed reaching the pressure setting. Return flow is free. Being insensitive to back pressures, it allows to use the circuit pressure to control both the actuators.
Materials and Features
Applications
For use with 2 actuators, follow the mounting instructions indicated in the scheme.For different uses, mount the valve keeping into consideration that, when the valve reaches the setting pressure, the flow goes from V towards C, whilst flow is free from C to V.
Fits On Cooler Types: TT 05 , 07, 11, 13, 16, 21 , 25
TYPE: VU2P
Use and Operation
This valve is used to select higher pressure between two pressure lines.
Materials and Features
Connect ports P to the 2 lines to select and U to the line to feed.
TYPE: VBPSE
Use and Operation
These valves are used to block the cylinder in one direction. The flow is free in one direction and blocked in the reverse direction until pilot pressure is applied.
Materials and Features
Applications
Connect V1 and V2 to the pressure flow, C1 to the free flow side of the actuator and C2 to the actuator’s side you want the flow to be blocked.
Electromechanical level indicator- temperature intank switch suitable for use with ASA Hydraulik coolers.
Technical Features:
Working temperature: -10°C ÷ +90°C
Maximum inclination: 15°
Max viscosity of the fluid: 150 cSt
Mechanical life: 106
cycles at 20°C
Body: in anodized aluminium with wetted part in stainless steel 316L (rod) and spancil pom (float)
Installation: must be least at 50mm away from ferrous walls and far from magnetic fields and in vertical position by 3 different types of hydraulic connection in only one execution:
– two holes flange (180°)
– three holes flange (120°)
– threaded 1”BSP-M
Electrical Features:
– Electrical connection according to DIN43650, M3
– Electrical protection according to DIN40050, IP65
– Exchange contacts (Common, NO and NC) – SPDT (simple contact for version with thermometer)
– Maximum load: 0.2A at 30VAC/VDC
According to the cooler type and size, our temperature switches fit on all coolers and connectors with BSP ½“ threads. Please contact us for the compatibility of the products. IP69K switch type ILLZTH6069K work in combination with our temperature control units ILLZTC12-2K (12V) and also with ILLZTC24-2K (24V). This is a simple on/off mode, according to the switch temperature. The control unit benefit is the soft start curve, extending the life time of the fan motor.
2 section monoblock directional control valve suitable for hydraulic systems with variable displacement pumps with load sensing compensator.
Applications: Front end loader
Read more about closed and open hydraulic systems.
No products in the basket.