-
€629.00 + vat
Manufactured by DNP Italy, steel and aluminum multi dock quick release set for use on loaders.
Multi dock set includes both fixed and mobile part:
- Part: PSW4.4CCG.2 (fixed)
- Part: PSW4.4CCG.3 (mobile)
Standard: DIN3852-2
Details:
- Interchange: Faster PS06
- Occlusion: flat face
- Locking: lever with safety device
- Material: steel and aluminum
- Finishing: Zn-Fe (Cr III), Anodizing
- Threads: BSP – NPT – SAE – METRICS
- Standard seals: NBR and PU
- Working temperature: -25 °C +100 °C
- Optional seals: FKM, EPDM or more.
- Working pressure: 250 bar
- Connection under residual pressure: allowed (male side only)
Quick release couplings are supplied separately.
-
€72.80 + vat
TYPE: VBCD
Use and Operation
These valves are used to control actuator’s movements and block in both directions in order to have a under control descent of a load; load’s weight doesn’t carry it away, as the valve prevents any cavitations of the actuator.
Materials and Features
- Body: zinc-plated steel
- Internal Parts: hardened and ground steel
- Seals: BUNA N standard
- Poppet Type: minor leakage
Applications
Connect V1 and V2 to the pressure flow, C1 and C2 to the actuator to be controlled. In-line mounting.
-
€16.55 – €23.00Price range: €16.55 through €23.00 + vat
TYPE: VBPDE
Use and Operation
Pilot check valves are used to block the cylinder in both directions. Flow is free in one direction and blocked in the reverse direction until pilot pressure is applied.
Materials and Features
- Body: zinc-plated steel
- Internal Parts: hardened and ground steel
- Seals: BUNA N standard
- Poppet Type: any leakage
Applications
Connect V1 and V2 to the pressure flow and C1 and C2 to the actuator.
-
€21.00 + vat
TYPE: VBPDE
Use and Operation
Pilot check valves are used to block the actuator in both directions. Flow is free in one direction and blocked in the reverse direction until pilot pressure is applied. Easily assembled on a cylinder.
Materials and Features
- Body: zinc-plated steel
- Internal Parts: hardened and ground steel
- Seals: BUNA N standard
- Poppet Type: any leakage
Applications
Connect V1 and V2 to the pressure flow and C1 and C2 to the actuator with a banjo.
-
€32.55 + vat
TYPE: VAU
Use and Operation
Made up by 2 relief valves with crossed tank, this valve is used to block pressure to a certain setting in the 2 ports of an actuator/hydraulic motor. It’s ideal to provide protection against sudden shock pressures and to adjust different pressures in the 2 ports of an hydraulic circuit as well.
Materials and Features
- Body: zinc-plated steel
- Internal Parts: hardened and ground steel
- Seals: BUNA N standard
- Poppet Type: minor leakage
Applications
Connect V1 and V2 to the pressure flow or to the actuator/hydraulic motor. Vice versa for the remaining ports V1 and V2. Mounting by the actuator is highly recommended in order to avoid pressure drops.
-
€37.50 + vat
TYPE: VAU OMP/OMR
Use and Operation
Made up by 2 relief valves with crossed tank, this valve is used to block pressure to a certain setting in the 2 ports of an actuator/hydraulic motor. It’s ideal to provide protection against sudden shock pressures and to adjust different pressures in the 2 ports of an hydraulic circuit as well. Direct flange is ideal for Danfoss motors type OMP-OMR and provides a maximum safety, very low pressure drops and solid installation.
Materials and Features
- Body: zinc-plated steel
- Internal Parts: hardened and ground steel
- Seals: BUNA N standard
- Poppet Type: minor leakage
Applications
Flange M1 and M2 directly to the motor and connect ports V1 and V2 to pressure flow.
-
€55.00 – €57.88Price range: €55.00 through €57.88 + vat
Use and Operation
Diverter flow is used to divert the flow towards 2 different outlets.
Materials and Features
- Body: steel
- Internal Parts: hardened and ground steel
- Seals: BUNA N standard
- Poppet Type: minor leakage
Applications
Connect P to the pressure flow, A and P to the ports of the hydraulic circuit where flow has to be diverted. With lever in position 1 the flow is connected towards port A; with lever in position 2, the flow is connected towards port B. With lever in central position ports P, A and B are all connected (open centre).
-
€11.00 + vat
TYPE: VUBA
Use and Operation
These valves are used to prevent uncontrolled descent of a load in case of hose failure.
When the flow exceeds the valve setting (reaction flow), this valve is designed to block it.
Materials and Features
Applications
Screw in the valve connecting V to the pressure flow and C to the actuator. The use together with a flow control valve is recommended.
-
Sale!
€675.00 Original price was: €675.00.€590.00Current price is: €590.00. + vat
- Hydreco 2210 Hydraulic Screen Motors 70.67cc available from stock.
- SAE (C) 1 ¼” parallel drive shaft and 1 ¼” SAE split flange ports with metric threads.
- These motors are ideal for Screenbox applications.
- Ready for immediate delivery!
-
€12.88 – €32.00Price range: €12.88 through €32.00 + vat
Use and Operation
For mounting between the end of a flexible hose and a fixed component to compensate hose’s rotations and torsion and to prevent its damaging. Not suitable for fast and continuous rotations. Used in every production field where systems have flexible moving hose. In line mounting.
Materials and Features
- Body: zinc-plated steel
- Poppet Type: low friction seals
Applications
Connect ports P to the uses.
-
€17.00 – €22.20Price range: €17.00 through €22.20 + vat
Joystick control cables for front end loader
Ball valve end connection to the joystick
Threaded end connection to the valve
Available lengths: 2 mt, 2.5mt. 3mt.
-
€68.00 + vat
One button joystick lever controller for use on front end loader.
-
€127.00 – €183.00Price range: €127.00 through €183.00 + vat
- Supplied with SAE 4 bolt type flange
- Fitted with built in check valves
- 32mm shaft
- Ductile cast iron shell
- Axial oil distribution, smaller size and relatively light
- Small friction and high mechanical efficiency
-
€14.45 – €280.00Price range: €14.45 through €280.00 + vat
- Supplied with SAE 4 bolt type flange
- Fitted with built in check valves
- 40 mm shaft
- Ductile cast iron shell
- Axial oil distribution, smaller size and relatively light
- Small friction and high mechanical efficiency
-
€14.44 – €362.00Price range: €14.44 through €362.00 + vat
- Supplied with SAE 4 bolt type flange
- Fitted with built in check valves
- 50mm shaft
- Ductile cast iron shell
- Axial oil distribution, smaller size and relatively light
- Small friction and high mechanical efficiency
-
€140.00 + vat
MR-BRAKE is a wet disc brake that adopts a high friction disc and high strength spring design to produce a robust, low noise, high braking component.
4 Drain port design.
Compact structure and easy mounting, this brake can be used for different applications and is suitable for use with MR series hydraulic motors.
It is widely used on heavy duty machinery in all types of applications including cranes, construction, material handling, agriculture, mining and forestry. It can also be used for winches and hydro-static drive systems.
